Revit Architecture 2010
Getting Started
| Introduction
|
Getting Started
| Getting Started
|
Getting Started
| Opening a File
|
Getting Started
| User Interface
|
Getting Started
| Ribbon
|
Getting Started
| Using the Ribbon
|
Getting Started
| Quick Access and Application Menu
|
Getting Started
| Project Browser
|
Getting Started
| Options Dialog
|
Getting Started
| Units and Snaps
|
Modeling 1
| Introduction
|
Modeling 1
| Drawing Aids
|
Modeling 1
| Creating Walls by Sketch
|
Modeling 1
| Creating Walls by Pick
|
Modeling 1
| Modifying Wall Properties
|
Modeling 1
| Wall Types
|
Modeling 1
| Wall System Families
|
Modeling 1
| Modifying Wall Profile and Adding an Opening to a Wall
|
Modeling 1
| Curtain Wall Types
|
Modeling 1
| Curtain Wall Components
|
Modeling 1
| Embedding Walls
|
Modeling 1
| Horizontal Wall Structure
|
Modeling 1
| Create Horizontal Wall Structure
|
Modeling 1
| Vertical Wall Structure - Regions
|
Modeling 1
| Vertical Wall Structure - Sweeps
|
Modeling 1
| Stacked Walls
|
Modeling 1
| Creating Doors and Windows
|
Modeling 1
| Door and Window Properties
|
Modeling 1
| Levels
|
Modeling 1
| Level Graphics
|
Modeling 1
| Copying and Moving Objects
|
Modeling 1
| Rotating and Arraying
|
Modeling 1
| Resizing and Mirroring
|
Modeling 1
| Align, Trim, Extend, Offset
|
Modeling 1
| Grouping
|
Modeling 1
| Grids
|
Modeling 1
| Adding Columns
|
Model Views
| Introduction
|
Model Views
| Overview
|
Model Views
| Zoom/Pan Controls
|
Model Views
| View tab Create panel
|
Model Views
| View tab Windows panel
|
Model Views
| Navigation Wheels
|
Model Views
| View Properties
|
Model Views
| Visibility/Graphics
|
Model Views
| View Scale and Detail Level
|
Model Views
| Model Graphics Style
|
Model Views
| Crop Region
|
Model Views
| Annotation Crop Region
|
Model Views
| Hide/Display
|
Model Views
| View Discipline
|
Model Views
| View Range
|
Model Views
| Plan Regions
|
Model Views
| Ceiling Plans
|
Model Views
| Elevation Views
|
Model Views
| Framing Elevations
|
Model Views
| Section Views
|
Model Views
| Callout Views
|
Model Views
| Sheets
|
Model Views
| Legends
|
Model Views
| Camera Views
|
Model Views
| Walkthroughs
|
Model Views
| 3D Orthographic Views
|
Model Views
| Schedules / Quantities
|
Model Views
| Object Styles
|
Model Views
| View Templates
|
Model Views
| Section Box
|
Model Views
| Phase and Phase Filter
|
Model Views
| Duplicate Views
|
Develop a Project
| Introduction
|
Develop a Project
| Object Display, Lines
|
Develop a Project
| Project Information and Place
|
Develop a Project
| Transfer Project Standards
|
Develop a Project
| Project North and True North
|
Develop a Project
| Project Templates
|
Dimensions and Constraints
| Introduction
|
Dimensions and Constraints
| Temporary Dimensions
|
Dimensions and Constraints
| Permanent Dimensions
|
Dimensions and Constraints
| Dimension Styles
|
Dimensions and Constraints
| Equality Constraint and Lock
|
Dimensions and Constraints
| Spot Dimensions
|
Dimensions and Constraints
| Units
|
Modeling 2
| Introduction
|
Modeling 2
| Compound Structures
|
Modeling 2
| Wall Joins
|
Modeling 2
| Using Editing Tools with Walls
|
Modeling 2
| Creating Floors
|
Modeling 2
| Floor by Face
|
Modeling 2
| Floor Properties
|
Modeling 2
| Sloped Floors by Defines Slope
|
Modeling 2
| Floor Openings
|
Modeling 2
| Floor Shape Tools
|
Modeling 2
| Floor Slab Edges
|
Modeling 2
| Creating Ceilings
|
Modeling 2
| Building Components in Ceilings
|
Modeling 2
| Ceiling Openings
|
Modeling 2
| Creating Roof by Footprint
|
Modeling 2
| Roof - Wall Joins and Roof Shape Editing
|
Modeling 2
| Slope Arrow
|
Modeling 2
| Create Roof by Extrusion
|
Modeling 2
| Align Eaves, Join Roofs
|
Modeling 2
| Creating Fascias and Gutters
|
Modeling 2
| Creating Soffits
|
Modeling 2
| Roof Openings
|
Modeling 2
| Creating Stairs
|
Modeling 2
| Stair Type Properties
|
Modeling 2
| Stairs with Landings
|
Modeling 2
| Creating Stairs by Sketching Boundaries and Riser Lines
|
Modeling 2
| Creating Spiral Stairs
|
Modeling 2
| Multi-Story Stairs and Shafts
|
Modeling 2
| Creating and Modifying Railings
|
Modeling 2
| Railing Properties
|
Modeling 2
| Creating Ramps
|
Modeling 2
| Roof and Wall by Face
|
Modeling 2
| Foundations
|
Modeling 2
| Stepped Foundations
|
Modeling 2
| Structural Beams
|
Modeling 2
| Beam Systems
|
Modeling 2
| Adding Structural Braces
|
Room and Area
| Introduction
|
Room and Area
| Rooms
|
Room and Area
| Room Tags
|
Room and Area
| Room Schedules
|
Room and Area
| Room Keys and Schedules
|
Room and Area
| Rooms and Phases
|
Room and Area
| Areas
|
Room and Area
| Area Types, Color Schemes and Color Fills
|
Room and Area
| Rooms and linked models
|
Drafting and Detailing
| Introduction
|
Drafting and Detailing
| Detail and Drafting Views
|
Drafting and Detailing
| Tags
|
Drafting and Detailing
| Drafting Techniques
|
Drafting and Detailing
| Using CAD files in Detail Views
|
Drafting and Detailing
| Detail Components
|
Drafting and Detailing
| Regions
|
Drafting and Detailing
| Region Patterns
|
Drafting and Detailing
| Text Notes
|
Drafting and Detailing
| Text Styles
|
Drafting and Detailing
| Reference Views
|
Drafting and Detailing
| Annotation Details
|
Components and Families
| Introduction
|
Components and Families
| Loading Component Families
|
Components and Families
| Editing Families in a Project
|
Components and Families
| In-Place Family: Solid and Void Extrusion
|
Components and Families
| In-Place Family: Solid Blend
|
Components and Families
| In-Place Family: Solid Revolve
|
Components and Families
| In-Place Family: Solid Sweep
|
Components and Families
| In-Place Family: Lines
|
Components and Families
| Family File Types and Templates
|
Massing
| Introduction
|
Massing
| Introduction to Massing, Placing Mass Elements and Mass Visibility
|
Massing
| In-Place Mass
|
Massing
| Solid Form with Profiles and Paths
|
Massing
| Conceptual Mass Family
|
Massing
| Reference Planes, Reference Lines
|
Massing
| Reference Points
|
Massing
| Dimensions and Parameters
|
Massing
| Family Types
|
Massing
| Model by Face
|
Massing
| Using 3D CAD Files
|
Graphic Controls
| Introduction
|
Graphic Controls
| Creating and Using Filters
|
Graphic Controls
| Graphic overrides
|
Graphic Controls
| Host Layers
|
Graphic Controls
| Site Settings - Toposurface Display
|
Graphic Controls
| Edit Face tools
|
Graphic Controls
| Cut Profile and Base Extension
|
Graphic Controls
| Show Hidden and Linework
|
Graphic Controls
| Custom Line Styles and Line Patterns
|
Graphic Controls
| Fill Pattern Orientation and Custom Fill Patterns
|
Graphic Controls
| Scope Box
|
Schedules and Tags
| Introduction
|
Schedules and Tags
| Creating a Component Schedule
|
Schedules and Tags
| Schedule Properties Dialog
|
Schedules and Tags
| Instance and Type Schedules
|
Schedules and Tags
| Project Parameters in Schedules
|
Schedules and Tags
| Schedule Appearance
|
Schedules and Tags
| Exporting Schedules
|
Schedules and Tags
| Drawing List View List
|
Schedules and Tags
| Material Takeoff
|
Schedules and Tags
| Generic Annotations
|
Schedules and Tags
| Note Block
|
Schedules and Tags
| Keynotes
|
Schedules and Tags
| Material Tag
|
Schedules and Tags
| View Reference
|
Schedules and Tags
| Shared Parameters
|
Schedules and Tags
| Multi Category Tag
|
Schedules and Tags
| Multi-category Schedule
|
Documentation
| Introduction
|
Documentation
| Setting up Sheets
|
Documentation
| Viewports
|
Documentation
| Titleblocks
|
Documentation
| Labels and Parameters in Titleblocks
|
Documentation
| Print Setup
|
Documentation
| Revisions
|
Documentation
| Revision Schedules
|
Site Tools
| Introduction
|
Site Tools
| Create a Toposurface using Points
|
Site Tools
| Create a Toposurface using CAD
|
Site Tools
| Divide a Toposurface
|
Site Tools
| Creating a Graded Region
|
Site Tools
| Property Lines and Contour Labels
|
Site Tools
| Parking, Site Elements and Building Pads
|
Site Tools
| Site Settings
|
Leveraging Other Files
| Introduction
|
Leveraging Other Files
| File Import Raster
|
Leveraging Other Files
| Using Imported Data for Modelling
|
Leveraging Other Files
| Import Settings
|
Leveraging Other Files
| File Export to CAD
|
Leveraging Other Files
| File Export Settings
|
Leveraging Other Files
| Export to Image
|
Leveraging Other Files
| Modifying Imported Information
|
Leveraging Other Files
| File Link
|
Leveraging Other Files
| Link Visibility and Constraints
|
Leveraging Other Files
| Links and Schedules
|
Leveraging Other Files
| Nested Links
|
Leveraging Other Files
| Links and Groups
|
Leveraging Other Files
| Shared Coordinates
|
Leveraging Other Files
| Publish Coordinates
|
Presentation Views
| Introduction
|
Presentation Views
| Cutaway Views
|
Presentation Views
| Shadows and Silhouettes
|
Presentation Views
| Animated Sun Studies
|
Presentation Views
| Basic Rendering
|
Presentation Views
| Rendering Settings
|
Presentation Views
| Material Render Appearance
|
Presentation Views
| Interior Lighting
|
Groups
| Introduction
|
Groups
| Create and place a Group
|
Groups
| Editing Groups
|
Groups
| Saving and Loading Groups
|
Groups
| Binding and Linking Groups
|
Collaboration
| Introduction
|
Collaboration
| Monitor
|
Collaboration
| Copy-Monitor
|
Collaboration
| Coordination Review
|
Collaboration
| Interference checking
|
Collaboration
| ODBC Export
|
Collaboration
| IFC Export and Import
|
Collaboration
| Export DWF
|
Collaboration
| Link DWF Markup
|
Collaboration
| Export 3D CAD and DXF
|
Collaboration
| Export to GBxml, 3ds Max, Room and Area Report
|
Family Creation
| Introduction
|
Family Creation
| Family Templates and Views
|
Family Creation
| 3D Modeling in Family Files: Extrusion and Blend
|
Family Creation
| 3D Modeling in Family Files: Sweep and Revolve
|
Family Creation
| Reference Planes in Family Files
|
Family Creation
| Reference Lines in Family files
|
Family Creation
| Symbolic Lines and Model Lines in Family Files
|
Family Creation
| Controls and Connectors in Family Files
|
Family Creation
| Masking Regions in Families
|
Family Creation
| Dimensions and Labels in Family Files
|
Family Creation
| Family Types
|
Family Creation
| Family Parameters and Formulas
|
Family Creation
| Nested Families and Visibility Controls
|
Family Creation
| Linked Parameters in Families
|
Family Creation
| Type Catalogues
|
Phases
| Introduction
|
Phases
| Phases and Project Templates
|
Phases
| Rooms, Schedules, Color Fills and Phases
|
Design Options
| Introduction
|
Design Options
| Setting up Design Options
|
Design Options
| Editing Design Options
|
Design Options
| Views and Design Options, Accept Primary
|
Worksets
| Introduction
|
Worksets
| Enable worksharing
|
Worksets
| Create Worksets
|
Worksets
| Concurrent Usage
|
Worksets
| Working Offline and Rolling Back
|
AutoCAD 2010
Getting Started
Starting AutoCAD
Initial Setup
New Features Workshop
Workspaces - Initial Setup
Workspaces - Switching
Workspaces - Settings
Application Menu
Quick Access Toolbar
InfoCenter Toolbar
Ribbon - Overview
Ribbon - Display Properties
Ribbon - Location
Ribbon - Sticky Panels
Status Bar - Drawing Aids
Application Status Bar - Tray Settings
Drawing Window
Drawing Window - Multiple Drawings
Model and Layout Tabs
Command Line
Dialog Box - Fundamentals
Palettes - Fundamentals
Toolbar - Fundamentals
Starting a New Drawing - Template Files
Starting a New Drawing - Template Default
Starting a New Drawing - Startup Wizard
Saving Drawings - SAVE and QSAVE
Saving Drawings - QSAVE and SAVEAS
Saving Drawings - Autosave Options
Saving Drawings - Backup Files
Saving Drawings - Release and Thumbnails
Open Drawings - Edit and Read Only
Open Drawings - Sheet Set Manager
Open Drawings - Import and Export DGN File
Using the Mouse - Fundamentals
Interface Components - UCSICON
Interface Components - ViewCube
Interface Components - SteeringWheels
Interface Components - Pull-Down Menu Drawing Basics
Drawing Lines - Command Line
Drawing Lines - Dynamic Input
Drawing Lines - Right-Click Menu
Repeating the Last Command
Command Options
Drawing Rectangles
Drawing Rectangles - Area
Drawing Rectangles - Dimensions
Drawing Rectangles - Rotation
Drawing Rectangles - Fillets
Drawing Rectangles - Chamfers
Drawing Rectangles - Width
Drawing Rectangles - Reset/Default Options
Undo and Redo Commands
Drawing Circles - Radius and Diameter
Drawing Circles - 2P and 3P
Drawing Circles - TTT and TTR
Drawing Circles - Defaults
Drawing Arcs - 3-Point Concepts
Drawing Arcs - 3-Point Options
Coordinate Systems - Concepts
Coordinate Systems - Absolute
Coordinate Systems - Relative
Coordinate Systems - Units
Erasing Objects - Picking
Selection Sets - Window and Crossing
Selection Sets - Window Polygon and Crossing Polygon
Selection Sets - Fence and Last
Selection Sets - Undo and Previous
Selection Sets - Box
Selection Sets - Restoring Objects with OOPS
Selection Sets - Deselect Objects
Selection Sets - All
Controlling Selection Settings
Status Bar - Grid
Status Bar - Snap
Status Bar - Ortho
Status Bar - Grid, Snap and Ortho
Status Bar - Direct Distance Entry and Dynamic Input
Polar Tracking - Absolute Angle Measurements
Status Bar - Polar Tracking Absolute
Polar Tracking - Relative Angle Measurements
Status Bar - Polar Tracking Relative
Status Bar - Polar Tracking Incremental Angles vs Additional Angles
Status Bar - Polar Tracking and Polar Snaps
Object Snaps Concepts
Status Bar - Object Snaps Running Mode
Status Bar - Object Snap Parallel
Status Bar - Object Snap Extension
Object Snap Overrides
Status Bar - Object Snap Tracking: One Point - Orthogonally
Status Bar - Object Snap Tracking: Two Points - Orthogonally
Status Bar - Object Snap Tracking: One Point - All Polar Angles
Status Bar - Object Snap Tracking Two Points - All Polar Angles
Object Snap Overrides - Temporary Track Point
Object Snap Overrides - Mid Between 2 Points
Options - Object Snap System Variables
Display Control
Zoom - Wheel Mouse
Zoom Settings - zoomfactor
Zoom Settings - mbuttonpan
Zoom Settings - viewres
Zoom Settings - vtoptions
Zoom - Right-Click Shortcut
Zoom - Ribbon Panel
Status Bar - Zoom and Pan
Pan - Ribbon Panel
SteeringWheel - 2D
Tiled Viewports - Creation
Tiled Viewports - Named
View Manager - Restoring Named Views
View Manager -Editing and Updating Named Views
View Manager - Creating Named Views
Managing Layers
Layer Concepts
Layer - Current
Layer States - On/Off
Layer States - Thaw/Freeze
Layer States - Unlock/Lock
Layer States - Lock Layer Fade
Layer States - Color
Layer Property Manager - Palette
Layer Property Manager - Columns
Layer States - Linetype
Layer States - Plot/No Plot
Layer States - VP Freeze
Layer States - New VP Freeze
Layer - New
Layer - Delete
Layer States - Description
Layer - Make Object's Layer Current
Layer - Match
Layer - Previous
Layer - Isolate
Layer - Unisolate
Layer - Freeze
Layer - Off
Object Properties
ByLayer and Object Property Concepts
ByLayer - Color
ByLayer - Linetype
ByLayer - Lineweight
Object - Color
Object - Linetype
Object - Lineweight
Object Property Creation and Control
Modify Properties - Property Panel and Layer Panel
Modify Properties - Quick Property Panel
Quick Property Panel Display Properties
Modify Properties - Properties Palette
Utility and Inquiry Tools
Measure Tools
Measure Tools - Distance
Measure Tools - Radius
Measure Tools - Angle
Measure Tools - Area Space
Measure Tools - Area Object
Measure Tools - Area Calculations
Measure Tools - Volume
Quick Calculator
Object Selection Filters
Quick Select
Complex Objects
Polylines - Property Concepts
Drawing Polylines - Lines
Drawing Polylines - Arcs
Drawing Polylines - Width
Drawing Polylines - Option Combinations
Drawing Donuts
Drawing Polygons - Inscribed
Drawing Polygons - Circumscribed
Drawing Polygons - Edge
Editing Polylines - Close/Open
Editing Polylines - Join Select
Editing Polylines - Join Multiple
Editing Polylines - Converting Lines into Polylines
Editing Polylines - Fit/Spline/Decurve
Editing Polylines - Edit Vertex
Explode Polylines
Drawing Ellipses - Center
Drawing Ellipse - Axis End
Drawing Ellipse - Isocircles
Drawing Ellipse Arcs
Drawing Points
Point Styles
Annotation Objects
Annotation Objects - Concepts
Annotation Scaling
Creating Single-Line Text
Single-Line Text Justification
Creating and Using Text Styles
Modifying Text Styles
Multiline Text
Multiline Text Justification
Editing Text Objects
Editing Text Objects Using the Properties Palette
Performing a Spell Check
Finding and Replacing Text
Creating Tables
Controlling Table Appearance Using Table Styles
Editing Text Within a Table
Modifying Tables
Linking Data in Tables
Working with Fields
Hatches and Gradient Fills - Concepts
Creating Hatch Objects
Selecting a Hatch Pattern to Apply
Setting the Scale and Angle of Hatch Patterns
Controlling Hatch Pattern Island Detection
Controlling Hatch Pattern Gap Tolerance
Overview of Associative Hatch
Overview of Annotative Hatch
Controlling the Hatch Origin
Creating Separate Hatches
Inheriting the Properties of an Existing Hatch Object
Controlling Hatch Pattern Draw Order
Modifying Existing Hatch Objects
Creating Gradient Fills
Creating Hatch and Gradient Fills Using Tool Palettes
Overview of Multileaders
Creating Multileaders
Creating Multileaders - Changing the Order of Content Creation
Selecting Multileader Options
Creating a Multileader with Block Content
Controlling Multileader Styles
Adding and Removing Leaders
Aligning Multileaders
Collecting Multileaders
Editing Multileaders
Modify Objects - Manipulation Commands
Overview of Manipulation Commands
Using the Move Command
Using the Move Command with Object Snap
Using the Move Command with Object Snap Tracking - One Point
Using the Move Command with Object Snap Tracking - Two Points
Using the Copy Command
Using the Copy Command with Object Snap
Using the Copy Command with Object Snap Tracking
Using the Mirror Command
Controlling Text Display with the Mirror Command
Using the Array Command - Rectangular by Distance Offset
Using the Array Command - Rectangular by Picking Offset
Using the Array Command - Polar
Using the Array Command - Polar Partial
Using the Rotate Command
Using the Rotate Command with Reference
Using the Offset Command
Using the Align Command
Modify Objects - Alteration Commands
Overview of Alteration Commands
Break At One Point
Break Between Two Points
Break - Application Example
Trim - No Extend Pick Selection
Trim - No Extend Fence Selection
Trim - Extend
Extend - No Extend and Extend
Extend and Trim Together
Extend and Trim Together - Application Example
Fillet - Radius
Fillet - Radius with Polylines
Chamfer - Distance and Angle
Chamfer - Distance with Polylines
Stretch
Join
Lengthen
Explode
Scale
Scale - Reference
Modify Objects - Grips
Grip Concepts
Grip Types
Grip Modes - Lines
Grip Modes - Arcs
Grips - Move
Grips - Mirror
Grips - Rotate
Grips - Scale
Grips - Stretch
Grip Arguments - Base Point
Grip Arguments - Copy
Grip Arguments - Reference
Grip - Application Example
Grip Options - Selection Settings Grips
Grip Options - Selection Modes
2D Parametric Drawings
Overview of Parametric Drawings
Display of Geometric Constraints
Applying Geometric Constraints
Applying Geometric Constraints - Coincident
Applying Geometric Constraints - Collinear
Applying Geometric Constraints - Concentric
Applying Geometric Constraints - Fix
Applying Geometric Constraints - Parallel
Applying Geometric Constraints - Perpendicular
Applying Geometric Constraints - Horizontal
Applying Geometric Constraints - Vertical
Applying Geometric Constraints - Tangent
Applying Geometric Constraints - Smooth
Applying Geometric Constraints - Symmetric
Applying Geometric Constraints - Equal
Removing Individual Geometric Constraints
Applying Auto Constrain
Auto Constraint Settings
Applying Dimensional Constraints
Applying Dimensional Constraints - Linear
Applying Dimensional Constraints - Aligned
Applying Dimensional Constraints - Horizontal
Applying Dimensional Constraints - Vertical
Applying Dimensional Constraints - Angular
Applying Dimensional Constraints - Radial
Applying Dimensional Constraints - Diameter
Converting Dimensions into Dimensional Constraints
Dimensional Constraint Settings
Show Dimensional Constraints
Controlling Other Dimensional Constraint Settings
Parameters Manager
Parameters Manager - Changing an Expression
Parameters Manager - Adding User Parameters
Parameters Manager - Deleting Parameters
Parameters Manager - Filtering Parameters
Changing Dimensional Constraints Using Grip Editing
Dimensioning
Dimensioning Concepts
Associative Dimensions
Linear Dimensions - Horizontal and Vertical
Aligned Dimensions
Linear Baseline Dimensions
Linear Continued Dimensions
Angular Dimensions
Angular Baseline Dimensions
Angular Continued Dimensions
Dimensioning Circles and Arcs - Radius and Diameter
Arc Length Dimensions
Jogged Dimensions
Ordinate Dimensions
Adding and Modifying Dimension Text
Changing the Location of Dimension Components
Adjusting Spacing Between Dimensions
Breaking Dimension and Extension Lines
Jogging Dimension Lines
Quick Dimensions - Baseline
Quick Dimensions - Ordinate
Using Dimension Styles
Creating New Dimension Styles
Applying a New Dimension Style
Updating Dimension Styles
Override Dimension Styles Using Properties
Interface Customization
What are Tool Palettes?
Controlling Tool Palette Display
Using Palette Tools
Creating Palettes
Palette Tool Properties
Creating Palette Tools - Hatch
Creating Palette Tools - Blocks
Creating Palette Tools - Objects and Flyouts
Creating Palette Tools - DesignCenter
Customizing the User Interface
Customizing the Ribbon Tabs
Customizing the Ribbon Panel
Adding a Tab and Panel to Workspaces
Customizing the Quick Properties Panel
Customizing Rollover Tooltips
Customizing Menu Search Tags
Customizing Quick Access Toolbar
Print and Plot Preparation
Print and Plot Concepts
Drawing Spaces: Model and Paper
Choosing a Printer
Placing a Title Block on a Layout
Creating Viewports
Setting a Layout Viewport Scale
Controlling Viewports Display
Placing Annotation on a Layout
Printing the Drawing
Plot Options and Orientation
Plot Style Tables
Blocks and Attributes
Block Concepts
Creating Blocks from Existing Objects
Understanding Block Properties
Changing Block Properties
Using Blocks within a Drawing
Using Multiple Blocks at Once
Exploding Blocks into Objects
Changing the Insertion/Reference Point
Dynamic Blocks Concepts
Dynamic Block Examples
Creating Dynamic Blocks from Existing Blocks
Creating Dynamic Blocks - Adding Parameters
Creating Dynamic Blocks - Adding Constraints
Editing Dynamic Blocks - Adding Additional Parameter
Changing the Properties of Parameters
Changing the Properties of Parameters - List
Changing the Appearance of Dynamic Blocks
Adding Constraints to Dynamic Blocks
Controlling Dynamic Blocks Using Block Tables
Adding Special Properties to Blocks
What are Attributes?
Adding Attributes to a Block
Adding Additional Attributes to a Block
Controlling the Visibility of Attributes
Synchronizing Attribute Data
Managing Attributes
Extracting Attribute Data from a Drawing
Divide and Measure Using Blocks
External References and Reusable Content
Reusable Content Concepts
External References - Concepts
External References - Application Example
External References - Attach and Detach
External References - Load and Unload
External References - Path
External References - Attach and Overlay
External References - Clip
External References - Bind and Insert
External References - Images
DesignCenter
Attaching a DWF File as an Underlay
External References and Reusable Content
Attaching a PDF File as an Underlay
Autodesk Seek
AutoCAD Utilities
Removing Unused Items
Checking for Drawing Errors
Changing the Display Order
Importing Files from Other Programs
Command Customization
Action Recorder - About Action Macros
Action Recorder - Using Existing Action Macros
Action Recorder - Creating Simple Action Macros
Action Recorder - Basic Editing Action Macros
Action Recorder - Sharing Action Macros
Action Recorder - Creating and Editing Complex Action Macros
Action Recorder - Action Macro Dialog Settings
AutoCAD PGP File - Creating Command Aliases
3D Basics
3D Concepts
The 3D Workspace
3D Viewing Tools - The ViewCube
3D Viewing Tools - 3D Orbit
3D Viewing Tools - View Presets
3D Viewing Tools - SteeringWheels
Visual Styles
3D Coordinate Systems
Dynamic UCS
Creating 3D Objects
Creating a Solid Box
Creating a Solid Cylinder
Creating a Solid Cone
Creating a Solid Sphere
Creating a Solid Pyramid
Creating a Solid Wedge
Creating a Solid Torus
Creating 3D Objects by Extruding 2D Objects
Creating 3D Objects by Revolving 2D Objects
Creating 3D Objects by Lofting 2D Objects
Creating 3D Objects by Sweeping 2D Objects
Creating 3D Objects Using Polysolid
Creating 3D Objects Using Press/Pull
Creating a Mesh Box
Creating a Mesh Cone
Creating a Mesh Cylinder
Creating a Mesh Pyramid
Creating a Mesh Sphere
Creating a Mesh Wedge
Creating a Mesh Torus
Creating 3D Revolved Mesh
Creating 3D Edge Mesh
Creating 3D Ruled Mesh
Creating 3D Tabulated Mesh
Creating 3D Objects
Controlling Mesh Primitive Options
Creating a 3D Helix
Modifying 3D Mesh Objects
Introduction to Mesh Editing
Smooth Object - Converting Objects into Meshes
Smooth More
Smooth Less
Refine Mesh
Add Crease
Remove Crease
Mesh Tessellation Options
Split Mesh Face
Extrude Mesh Face
Convert to Solid
Convert to Surface
Deforming a Mesh
Modifying 3D Objects
Using Gizmos
Mirroring Objects in 3D
Moving Objects in 3D
Aligning Objects in 3D
Rotating Objects in 3D
Arraying Objects in 3D
Scaling Objects in 3D
Editing Solid Primitives
Editing 3D Subobjects
Creating Composite Solids - Boolean Operations
Creating a Composite Solid Using Union
Creating a Composite Solid Using Subtract
Creating a Composite Solid Using Intersect
Editing a Solid - Adding a Chamfer
Editing a Solid - Adding a Fillet
Editing a Subobject within Composite Solids
Extracting Edges from 3D Objects
Editing Edges of a Solid - Imprinting onto a Solid
Editing Edges of a Solid - Changing the Edge Color
Editing Edges of a Solid - Copying Edges
Editing Faces of a Solid - Extruding Faces
Editing Faces of a Solid - Tapering Faces
Editing Faces of a Solid - Moving Faces
Editing Faces of a Solid - Copying Faces
Editing Faces of a Solid - Offsetting Faces
Editing Faces of a Solid - Deleting Faces
Editing Faces of a Solid - Rotating Faces
Editing Faces of a Solid - Changing the Color
Editing Entire Solids - Separating Solids
Editing Entire Solids - Cleaning Solids
Editing Entire Solids - Shelling Solids
Editing Entire Solids - Checking Solids
Checking Solids for Interference
Slicing Solids
Creating a Solid by Thickening a Surface
Creating Sections - Section Planes
Creating Sections - Adding Jogs to a Section Plane
Creating Sections - Creating and Updating Cross Sections
Creating Sections - Creating Elevations
Creating Sections - Controlling Section Settings
Creating a 2D Representation of a 3D Object
Solid View
Solid Drawing
Solid Profile
Creating Non-Printed Output
Exporting to PDF
Sending Models to a 3D Print Service
Sending Electronic Transmittal Sets
Exporting to DWF
Exporting a Model to a 3D DWF